direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Inhalt des Dokuments

Gabriele Camerlengo (M.Sc.)


+49 (0)30 314 27345 (Tel)
+49 (0)30 314 22638 (Fax)

Büro: VWS 113
Post: TU-Berlin, Sekr. MB1
Müller-Breslau-Straße 15
10623 Berlin



  • Kompressible Strömungen
  • Fluiddynamische Stabilität
  • Wärmeübergang bei erzwungener Konvektion
  • Turbulenzmodellierung
  • Numerische Mathematik


Wissenschaftliche Beiträge

Effects of Wall Curvature on the Dynamics of an Impinging Jet and Resulting Heat Transfer
Zitatschlüssel camerlengo2019effects
Autor Camerlengo, Gabriele and Borello, Domenico and Salvagni, Alessandro and Sesterhenn, Jörn
Buchtitel Active Flow and Combustion Control 2018
Seiten 355–366
Jahr 2019
ISBN 978-3-319-98177-2
DOI 10.1007/978-3-319-98177-2_22
Adresse Cham
Herausgeber King, Rudibert
Verlag Springer International Publishing
Zusammenfassung The curvature on the dynamics of a round subsonic jet impinging on a concave surface are investigated for the first time by direct numerical solution of the compressible Navier-Stokes equations. Impinging jets on curved surfaces are of interest in several applications, such as the impingement cooling of gas turbine blades. The simulation is performed at Reynolds and Mach numbers respectively equal to 3, 300 and 0.8. The impingement wall is kept at a constant temperature, 80 K higher than that of the jet at the inlet. The nozzle-to-plate distance (measured along the jet axis) is set to 5D, with D the nozzle diameter. In order to highlight the curvature effects, the present results are compared to a previous study of jet impinging on a flat plate. The specific influence of wall curvature is investigated through a frequency analysis based on discrete Fourier transform and dynamic mode decomposition. We found that the peak frequencies of the heat transfer also dominate the dynamics of primary vortices in the free jet region and secondary vortices produced by the interaction of primary vortices and the target plate. These frequencies are approximately 30% lower than those found in the reference study of impinging jet on a flat plate. Imperceptible differences were instead found in the time-averaged integral heat transfer.
Link zur Originalpublikation Download Bibtex Eintrag

Zusatzinformationen / Extras


Schnellnavigation zur Seite über Nummerneingabe

Diese Seite verwendet Matomo für anonymisierte Webanalysen. Mehr Informationen und Opt-Out-Möglichkeiten unter Datenschutz.